Differences

This shows you the differences between two versions of the page.

Link to this comparison view

cnc:reference:mf70_mach3_cfg [2019/01/05 12:10]
jin created
cnc:reference:mf70_mach3_cfg [2019/02/05 11:31] (current)
jin
Line 5665: Line 5665:
 </​profile>​ </​profile>​
 </​file>​ </​file>​
 +
 +===== Others =====
 +
 +From [[http://​www.jarkman.co.uk/​catalog/​cnc/​mf70.htm]]:​
 +
 +<​code>​
 +The drivers are set to 8 microsteps, giving 1600 steps/rev
 +
 +The setup in Mach3 is:
 +
 +Units - mm
 +
 +Motor tuning - X,Y, and Z - 1600 steps per mm, velocity 250 mm/min, acceleration 20 mm/s/s (~0.002G), step pulse 0, dir pulse 0
 +
 +Port setup - Port 1, 0x378, kernel speed 25000
 +</​code>​
 +
cnc/reference/mf70_mach3_cfg.txt ยท Last modified: 2019/02/05 11:31 by jin
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0