====== Tips ======

[[http://viz.co.uk/category/top-tips/|{{http://fuddymuckers.co.uk/gallery/wiki_bits/toptips.jpeg |Click for some Viz Top Tips!}}]]

===== Bits =====

  * Single-flute cutters for aluminium & plastic
  * Downward cut bits for clean edges on top of part, especially engraving

===== Problems =====

==== Snapping bits ====

I snapped quite a few micro-drills until I realised the chuck had a lot of runout, switching to collets (standard micromot) fixed it.