====== Washers & Wipers ======

===== Washers =====

Someone said Defender washer jets fit in a Series bulkhead and give double jets, which they do... but...

{{ http://fuddymuckers.co.uk/gallery/s/500/eddie_18/2019-03-24_13-32-02.jpg }}

They also collide with your wipers and sometimes twang them off into the undergrowth :glare:

Here's the problem:

{{ http://fuddymuckers.co.uk/gallery/s/500/eddie_18/2019-03-24_13-45-07.jpg }}

So obviously the thing to do is to cut up a new set of Series 3 jets and glue in the tips of some from another car to give 4 jets in a Series nozzle:

{{ http://fuddymuckers.co.uk/gallery/s/500/eddie_18/2019-03-30_16-04-23.jpg }}

I'll let you know if this works or explodes! :ph34r:

{{ http://fuddymuckers.co.uk/gallery/s/500/eddie_18/2019-05-25_17-14-22.jpg }}

Plumbing on the back done in 6mm push-fit nylon, one line per nozzle leading back to a Y piece...

===== Wipers =====

Well first off this isn't going to stay like this!

{{ http://fuddymuckers.co.uk/gallery/s/500/eddie_18/2019-04-14_16-26-47.jpg }}

{{ http://fuddymuckers.co.uk/gallery/s/500/eddie_18/2019-03-30_16-22-51.jpg }}

Found the right little connectors from [[https://www.altecautomotive.co.uk/|Altec Automotive]] and re-pinned it with fresh wire, that's better!

{{ http://fuddymuckers.co.uk/gallery/s/500/eddie_18/2019-05-05_12-35-29.jpg }}

Loomed up along the top of the bulkhead:

{{ http://fuddymuckers.co.uk/gallery/s/500/eddie_18/2019-05-25_22-00-24.jpg }}

{{ http://fuddymuckers.co.uk/gallery/eddie_18/500/2019-09-01_11-37-50.jpg }}

**Onwards to [[9_bulkhead|Bulkhead]]...**