====== Lucas / BS / Land Rover standard wiring colours ====== Land Rovers and many other British cars use the "[[http://www.team.net/sol/tech/LucasColours.html|BS-AU7a 1983 Colour Code for Vehicle Wiring]]" or some variations of it. Thanks to [[https://forums.lr4x4.com/topic/113730-what-does-this-relay-do/?do=findComment&comment=1066542|Monkie]] for posting this on LR4x4. There's also a PDF on Autosparks website if you want something printable: [[https://www.autosparks.co.uk/media/AutosparksBSCC.pdf|AutosparksBSCC.pdf]] A solid colour is from a supply to a switch and a striped colour is switch to component. I have used the standard lucas colour code: G=green, LG = light green, R=red, U=blue, W=white, O=orange, P=purple, N =brown, B=black, Y=yellow, S=slate(grey), K=pink. G fused ignition on GR left turn signal GW right turn signal GP brake lights GN reverse light GB fuel sender GY heater blower motor switch GS heater blower motor switch LGG oil temperature LGW oil pressure sender LGB screen wash pump LGP trailer warning light LGN hazard switch to flash relay R running lights RO right side/tail RB left side/tail RY rear fog RLG wiper motor RW gauge & panel illumination U head lights UO right main US left main UK left dip UB right dip UG wiper motor W unfused live ignition on WR ignition switch to starter relay WO ignition switch to heater blower fuse and radio WB rear window heater WS fuel sender to guage WN oil pressure warning lamp WY hand brake warning light WG Heated rear window switch to relay/dash light P unfused permanent live PG fuse to heater blower motor PO seat belt warning light (where fitted) PW interior cab light PU door switch (where fitted) N permanent live from positive terminal bus on starter solenoid NLG wiper motor NY charge warning light NLG flasher relay NW fuse to heated rear window relay B earth BU diff lock engaged warning light BW brake warning light BR hazard switch illumination BK heated rear window relay to diode BS heated rear window diode to voltage sensitive switch YB Glowplug Feed