====== Megasquirt Wiring for Rover V8 ======

===== D37 Connector =====

{{http://fuddymuckers.co.uk/gallery/s/800/ms/DB37_V3_EDIS.jpg}}

===== VR Sensor Connection =====

{{http://fuddymuckers.co.uk/gallery/s/500/ms/Ford_vr_connector.GIF}}

===== Overall wiring diagram =====

<WRAP center round important 60%>
**Please see the updated power supply wiring further down**
</WRAP>

{{http://fuddymuckers.co.uk/gallery/s/800/ms/MS-n-EDIS_Loom.jpg}}

===== Power Supply =====

This is an improvement on the above with better fusing, and powering the ignition coils directly from the ignition switch should provide enough electrical load to prevent "running on" which used to be fixed by adding a diode in the alternator sense wire.

{{http://fuddymuckers.co.uk/gallery/s/800/ms/ms_power_wiring.png}}

===== Coil packs =====

**Using Ford EDIS8 on Rover V8**

{{http://fuddymuckers.co.uk/gallery/s/500/ms/coil_wiring.jpg}}